3D Ring Industrial Safety Belt Fall Arrest Harness with En361
|FOB Price:||US $7 / Piece|
|Min. Order:||100 Pieces|
|Min. Order||FOB Price|
|100 Pieces||US $7/ Piece|
|Payment Terms:||L/C, T/T, Western Union, Paypal|
- Model NO.: GBS102
- Safety Belts Material: Polyester
- Certification: CE
- Fixed Mode: Four-point
- Color: Red&Yellow
- Applicate: Construction,High Operating Work,Electrican
- H.S Code: 63072000
- Metallic Fittings: Alloy Steel,Chromed Plated
- Optional Lock Hook: Big Hook,Medium Hook,Small Hook
- Transport Package: Bag, Color Box
- Origin: Zhejiang, China
- Type: Building Safety Belt
- Safety Ropes Material: Polyamide Ester
- Safety Belts, Safety Ropes Length/Meter: 5~10
- Strength: ≥23kN
- Certificate: Ce/En355&Ce/En361&ANSI
- Webbing Width: 45mm
- Package: Plastic Bag/Color Box/Non-Woven Bag/Carton
- Optional Lanyard: Rope Lanyard,Webbing Lanyard
- Trademark: GB, OPT
- Specification: CE
- HS Code: 63072000
|GBS102||1.Polyester Webbing width:45MM|
3.Rear fall arrest rated D-ring
4.Front plastic buckles
5.Two side attachment D hooks
6.Removable tongue buckle leg straps
7.Metallic fitting:alloy steel,zinc/chromed plated
8.Size of rope:13MM*150CM;Lengthen:200CM.
|1SET per OPP bag,then packing in non-woven bag or color box.||CE|
Pictures of GBS102
Service advantages of g&b safety belt:
-wholesale:MOQ is small, factory price offered;Larger orders, cheaper prices.Easy start for your business,
-OEM / ODM:We also supply professional ODM and OEM services, as well as professional design service.
-sample:Sample make is available based on photos, and sample cost will be deducted in bulk order.
- 24 hours instant and comfortable customer service.
-shipping status notification during delivery.
-regular notification of new styles & hot selling styles.
Payment & shipping of g&b safety belt:
How to put on the safety belt:
1.Take the harness out from the packing, holding it by the dorsal tightening ring.
2.Wear the harness by slipping on the shoulder straps one after one, taking care not twist them.Adjust them by pulling or releasing the slack end, so that the buttock strap is firmly in place under the buttocks.Pull one and the other thigh strap through the crotch and latch each strap.Make sure not to cross the straps.
3.Attach the chest strap and adjust its tension to hold the shoulder straps centered on each shoulder.Check that the belts would not be wrapped up themselves.
4.Adjust the harness by pulling and releasing the free end of the belt, so that the belts would be well tight and at the same time would not prevent free movements.
5.The adjustment should be effected by checking that the dorsal ring would be positioned between the shoulder blades or frontal tightening connector would be positioned at the height of the breastbone and that the sitting belt would be correctly positioned.
6.For the frontal tightening, the connector of the two back eyes should be in compliance with the norm en362, always connected to both eyes and locked.It is always recommended its use, even if you are using the dorsal tightening ring.
Harness is put on correctly if:
* all straps are correctly adjusted (neither too loose nor too tight).
* back attaching buckle is correctly positioned at the level of the shoulder blades.
* front chest strap is correctly positioned at the middle of the chest.
* the ends of all the straps must be kept by plastic loops.
Every piece packed in bag or color box.Costs for different packing are with a little bit difference.
Quality is our best-selling guaranteed
Many kinds of products
Samples are available
Good after-sales service
Good quality and service
Secure order/fastest shipping
Fast reaction to feedback the requirements & problem solutions
Tel.:+86 592 5780864
Fax:+86 592 5598316